2 Stroke 3.5HP Outboard Motor, 49CC 40cm Short Shaft Outboard Motor Boat Engine with Water Cooling CDI System for Inflatable Boat, Kayak, Canoe, Fishing Boat

$310.29

Description

Brand Eapmic
Color 2 Stroke 3.5HP
Material Aluminum
Engine Type 2 Stroke
Operation Mode Manual

About this item

  • 【2 Stroke 3.5HP Outboard Motor】- VONZOER 2 Stroke 3.5HP Outboard Motor, superior engine with water cooling CDI system to improve the reliability of the whole machine. Fuel saving, quick start, strong horsepower, low noise, superior performance, environmental protection, durable and compact structure, forward design.
  • 【Wide Applications】- VONZOER outboard boat motor is great for inflatable boats, small yachts, fishing boats and sailboats or used as an auxiliary trolling motor. It is suitable for both saltwater and freshwater.
  • 【Main Parameters】- Type: 2-stroke; Overall length: 83cm(32.68inch); Overall widteh: 36.5cm; Overall height: 22cm; Transom height: 42cm; Full throttle perating range: 4000-5000r/min; Maximum output: 2.5kw (3.5HP); Speed:12km/h; Short shaft: 40cm; Ignition system: CDI system; Starting system: Manual start; Staring carburetion system: Choke start; Propeller mark: 7-1/45-A(inch); Engine and propeller ratio: 2:1; Recommended fuel: Regular unleaded gasoline; Fuel to oil ratio: 35:1; Gear ratio: 27/13
  • 【Warm Note】- Please add gear oil to the gears before use the motor and replace gear oil after the run-in period(10 hours). Our outboard motor doesn’t with gear oil, please prepare it by yourself; 2 strokes 3.5 hp and 3.6 hp are controlled by the handle, which is operated by the clutch. There is no Neutral, only idle mode or low speed mode.
  • 【Hard To Start?】- If the outboard motor is hard to start, please do as follows: 1.Please make sure the ratio of Gasoline: Oil = 25:1., please do use special oil for 2-stroke motor; 2.Press the button on the carburetor for several times until the yellow and black pipes are full of oil; 3.Leave the throttle in the start position before starting,and then keep it in the ON position after running.